• TimeApp 200

NTP Synchronised Clock Display

The TRANTEK TIMEAPP 200 is an Ethernet digital LED Clock. It connects to a Time Server on a LAN, WAN or over the Internet to synchronise its time using the SNTP protocol.

Features include Web browser configuration, selectable time and date formats, selectable time zone and automatic daylight saving, 30m viewing distance, adjustable brightness, and 100ms accuracy.

• TimeApp 210

Network Time Server Master Clock and Display

The TRANTEK TIMEAPP 210 is an NTP Time Server and Display. The NTP network time server in the TIMEAPP 210 will synchronise time in computers and other network equipment running NTP client software. The Timeapp 210 can be used to synchronise the Timeapp 200 clock displays.

The TIMEAPP 210 uses "indirect GPS" to obtain the correct time. The GPS time code is relayed by the CDMA cellular phone base stations. This means that accurate time is available anywhere a CDMA phone signal is received and unlike GPS systems the antenna does not need to have a clear view of the sky. The TAD-210 comes with its own small indoor antenna.

• TimeApp 300

PoE NTP Clock and Eigth Character Display

The TRANTEK TIMEAPP 300 is a Power over Ethernet appliance that integrates alphanumeric messages and time display. The TAD-300 displays time and date and, like the Timeapp 200, synchronises to an NTP time server. Alphanumeric messages can be displayed 8 characters at a time in a scrolling fashion and are preceded by a sound or recorded voice.

The messages and sound files can be stored in the clock and played at time intervals configured for each clock or on demand using a web interface.

• TimeApp 400

NTP Time Router

The TRANTEK TIMEAPP 400 is a multiport slave NTP time server that can synchronise separate networks.  One port is connected to a network with an NTP time server where the TAD-400 synchronises its own clock.  On each of the other ports the TAD-400 will act as an NTP time server where each Ethernet port is assigned to a different network. On the Ethernet ports designated as server ports the unit will only respond to NTP queries while on the third port, the TAD-400 can be configured with a web browser as well as accepting SSH connectons.

The TIMEAPP 400 is designed for use where accurate time needs to be served across several unconnected networks in a secure manner, without the investment of separate time servers for each network.  There is an option of 3 or five ports.

• LAN Display

Trantek LanDisplay LED products provide all the facilities of conventional display systems, along with the advantages of TCP/IP network connection, system wide synchronisation, web enabled control and management.

Communication with the LanDisplay is achieved though a number of physical interfaces, available for Ethernet and CAN Networks. Redundant communications interfaces are available for high reliability installations.

The LanDisplay includes an annunciator function, where audio messaging is required. The LanDisplay range is available for indoor and outdoor use as well as for vehicle applications including rail, where EN50155 certification is required.

• VMT4

CCTV Keyboard Control Interface

The TRANTEK VMT-4 Networked Video Matrix Switch uses traditional CCTV keyboards as the user interface to a network of video over IP codecs. It provides analogue CCTV video matrix functionality to networked video applications. It is ideally suited to the integration of IP network based video encoders to existing analogue installations or in situations where operations are better served by the use of traditional CCTV control keyboards and monitors.

The VMT-4 can be used in conjunction with other VMT switches or PC based GUI management workstations. The VMT-4 optimises bandwidth use by streaming only the cameras that are being monitored.

The VMT-4 can be used with generic CCTV keyboards using the Pelco ASCII protocol as well as with Pelco and Kalatel keyboards. There is PTZ control for cameras using Pelco D, Elbex EX2000-8000, Calibur and Kalatel ASCII protocol.

If your camera or keyboard is not listed here, please ask us about adding support for it.

• VMT8

I-BOX Image Analysis Platform

The I-Box is a single camera image processo that provides a platform for running image analysis algorithms. Designed to be installed in legacy analogue video security networks as well as in modern digital streaming video networks

The I-Box is a low-cost hardware platform that takes an analogue video feed and then provides the digitised information to an algorithm (or suite of algorithms) resident in the I-Box for processing. If anomalous behaviour is detected the operator is alerted using the existing alarm network and/or video signal itself. Algorithms can be loaded into the I-Box through a network interface from a laptop PC or through a USB dongle

The power consumption is sufficiently low that it can be powered from existing camera power supplies. The I-Box is built on a low cost high reliability embedded processor with a secure microkernel. The result is a high reliability system able to operate in the field for years without the need for software or hardware maintenance.

• VideoJet 10

VideoJet 10 Video Sender The VideoJet 10 with S-VHS video encoding provides high quality real time video images with bidirectional audio over IP networks.

• VideoJet 1000

Bringing you the utmost in digital video quality and performance and satisfying even the most stringent professional high-end requirements. The single channel network video codec combines an encoder and a decoder in a single compact box. The system provides simultaneous transmission in two compression standards: MPEG-2 guarantees needle-sharp images in DVD quality, which can also be saved on an optional local hard disk, while video images can be streamed simultaneously over the Internet using MPEG-4.

• VideoJet 8000

The VideoJet 8000 professional network video server is designed for uncompromised quality in video surveillance and monitoring over IP networks, featuring 8 non-multiplexed data streams with both, DVD- and S-VHS-quality.

• C 100

The C100 is a multi-standard IP camera which can operate in both digital and analog environments. Can be linked directly to your local Ethernet network or to the Internet, and simultaneously to an analog survailance system via its video output connector.

• Vidos

With Vidos you can receive, decode, display and record multiple video signals from any IP network together with audio and other transparent data. You can manage the data easily thus guaranteeing best possible reaction in the event of an alarm.

• Vidos-NVR

VIDOS-NVR adds netwroked video recording functionality to the VCS recording and alarm management software VIDOS.

• MediaRacer 100

MediaRacer 100 Multimedia gateway delivers high quality Video, Audio and Data over TCP/IP networks. MediaRacer 100 supports MPEG4, MPEG2, Wavelet and other compression formats, featuring full motion video at full resolution. Its dual compression engine supports dual video streaming or simultaneous encoding/decoding capability, depending on the unit's model. The unit features either one video camera input and one video output for monitor connection or two camera inputs. In addition all units have two RS232 and one RS485 port, one bi-diractional audio link, and four Discrete I/O connections. MediaRacer 100 supports video stream at bandwiths ranging from 19.2 kbps and up.

• MediaRacer 1000

MediaRacer 1000, provides 4 video ports with a built-in matrix, a bi-directional audio channel, 2 serial ports (RS232 and RS485), 4 digital inputs and 4 digital outputs, pre & post alarm buffering, in a box the size of a VHS cassette. MediaRacer® 1000 features the lowest delay for video streaming (less than 100 msec), and the best quality in video motion, at 25/30 fps (50/60 fields/sec), thanks to the use of an advanced Wavelet compression algorithm.

• MediaRacer 1001

MediaRacer1001 features full motion video at full CCIR601 resolutions (PAL/NTSC). MediaRacer1001 features one video camera input, RS232, RS485 and two Discrete I/O connections. MediaRacer1001 supports video stream bandwidths of up to 8Mbps, being a wide range solution that is applicable to low, medium and large size applications. This capability is achieved by using a new, state-of-the-art, WAVELET compression standard.

• Maview

Maview software is the Graphical User Interface use to manage a virtual matrix of MAVIX products. It allows you to receive and decode video signals, alarams and audio on a PC as well as manage connections between encoders and decoders.

• StreamR

StreamR Network Video Recorder software adds recording functionality to the MAVIX products.

• AMT

Multi-zone digital Public Address system. Specially designed for rail and bus applications with EN50155 certification. The main building block of the AMT system consists of powered speaker/amplifier modules that can reproduce sound streamed across a CAN digital network. Two-way intercomm units also connect to the CAN network to provide a assistance to passengers or personnel. The speakers provide self-diagnostics and report the success of announcements back to the controlling unit. Speaker volume is automatically adjusted to compensate for background noise levels.